Product ID:TILE AND GROUT REMOVER
MSDS Date:10/01/1992
FSC:8030
NIIN:00N056901
MSDS Number: BWLYY

AMERICAN OLEAN TILE CO

1000 CANNON AVE
LANSDALE, PA 19446-0271
US

Info Phone: 215-855-1111

Cage: 7P894

AMERICAN OLEAN TILE CO,(THE CAMBRIDGE TILE MFR CO)

LANSDALE, PA 19446 US

Telephone: 215-855-1111

Cage: 7P894

24 @ 68F

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 85-95%

OSHA PEL N/K

ACGIH TLV: N/K

<20 @68F

CAS: 16689-43-8

Fraction By Weight: 5-15%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PROLONGED OR REPEATED
OVEREXPOSURE TO VAPORS MAY CAUSE SLIGHT RESPIRATORY TRACT OR EYE
IRRITATION. SKIN IRRITATION AND DERMATITIS MAY DEVELOP FROM
PROLONGED CONTACT WITH SKIN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EXISTING SKIN CONDITIONS.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:MOVE PERSON TO FRESH AIR
IF EXPOSED TO EXCESS CONCENTRATION OF VAPORS. CALL PHYS IMMED.
EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH
THOROUGH LY WITH SOAP AND WATER OR HAND CLEANER.

Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:USE HIGHLY ABSORBENT MATLS TO SOAK UP SPILLS.
SCOOP MATL INTO APPROVED DOT CONTAINER, AVOIDING SKIN AND EYE
CONTACT. REMOVE TO SAFE PLACE WHERE MATERIAL CAN DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID EXTREME HEART OR COLD. USE ONLY
AS DIRECTED ON LABEL. CLOSE CNTNR AFTER EACH USE. DO NOT RE-USE
CNTNR. KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:PROPER VENTILATION NORMALLY SUFFICIENT. IF EYE
WATERING, HEADACHES OR DIZZINESS ARE EXPERIENCED, INCREASE FRESH
AIR SUPPLY, WEAR NIOSH/MSHA APPRVD RESPIRATORY EQUIPMENT, OR LEAVE
THE AREA.
Ventilation:USE W/ADEQ VENT. OPEN DOORS & WINDOWS & UILIZE OTHER
MEASURES ASSURE FRESH AIR ENTRY & EXHAUST. SLIGHT (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH SKIN THOROUGHLY WITH SOAP AND WATER OR
HAND CLEANER.
Supplemental Safety and Health
HAZ DECOMP PROD:DEGRADATION OF ORGANIC COMPOUNDS. VENT:SILICONE ODOR
MAY BE PRESENT UNTIL SEALER DRIES.

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.02
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:90-95

Stability Indicator/Materials to Avoid:YES
MATERIAL SENSITIVE TO ACIDS OR STRONG ALKALINE SOLUTIONS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:BURNING CAN PRODUCE ALKALINE SODIUM
SALTS, CO, CO*2, AND OTHER TOX VAPS & GASES THAT ARE COMMON TO
THERMAL (SUPDAT)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT FLUSH ADHESIVE DOWN DRAINS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.